Instructions

Print in mirror image mode onto the WHITE unprinted side of the transfer paper

Printer Driver settings
Transfer Paper Mode (if available) or Normal Paper using the best print quality. We recommend to allow the printout to dry for about 30 minutes before continuing your work

Preparation and Ironing
Switch your iron to the highest setting and pre-heat.

A: Cut out the image with 5mm space and place the paper with image side face DOWN onto the T-shirt fabric which must be wrinkle free and pre-ironed.

B: Place a smooth cloth for example two to three kitchen towels or a folded pillowcase between the T-Shirt and a solid surface such as a table top

C: Iron the image by applying consistent circular pressure distributing the heat evenly

D: Concentrate on using the centre of the Iron during transfer, including all the edges of image. Do Not use steam
Apply heat for 60 - 90 seconds (1/2 page images) and 90 - 120 seconds for larger sizes

E: Let the Transfer paper cool and peel off the interleaving paper from one of the corners using firm and steady pressure.
To transfer more than one image onto both sides of the fabric -- firstly iron all images onto the T-shirt but do not remove the transfer backing paper . Finally when all images are cold remove the transfer paper.

Wash at max 40 deg C, turning the garment inside out. Do not Bleach. Do not use a tumble-dryer.
Ironing after washing: protect the image with paper (preferably kitchen baking paper)

FOR YOUR SAFETY:
When using an iron, follow manufacturer's instructions.
When using a printer, follow the instructions in the User Manual
Children must use textile transfers under adult supervision only