Your shopping cart is empty!


Double Decker Stepper Card by Sheila Weaver

If you have any problems with this project and are a member of the Joanna Sheen forum, please contact Sheila W. via YUKU mail. If you are not a member, please come and join us and message me.


1 A4 Sheet JS Elegance Satin 300gsm card.
2 A4 Sheets JS Elegance Satin 160gsm paper.
1 A4 Sheet JS Gold Mirri Card.
Sticky stuff – I used double sided tape, foam pads, and Pinflair glue gel.
JS House Mouse CD Rom and Project Book.

Approx 40cms JS Dotty 10mm Bridal White Sheer Organza Ribbon.
Promarker pens – I used Apple and Fuchsia
Optional – Promarker Blender Pen – will remove any bleeding of colour on ribbon.

6 Self-adhesive pearls.

Miss Godiva Prima flower.
Punch Bunch Medium Oak Leaf punch and small amount of green paper to punch leaves.


Step One

Using JS 160gsm Elegance Paper, print out a sheet of toppers and matching backing paper from the CD.


Step Two

Using an A4 sheet of JS 300gsm Elegance Satin Card, measure, mark, score, cut and fold as shown.


Step Three

Shows the card blank folded into shape.


Step Four

Mount the largest topper onto a piece of gold mirri card and then onto a backing paper mat. The topper should measure approximately 14cms x 12cms when mounted. Using double sided tape attach to the front of the card, centering above the middle step. The topper will over sail the top of the card by approximately 3cms.

Cut two pieces of backing paper 2.5cms x 11cms and mount onto gold mirri card. The mounted panels should measure 3cms x 11.5cms. Attach to the card either side of the large topper. Decorate each side panel with three small pearls.

Take a length of bridal white dotty organza ribbon and using Apple and Fuchsia Promarker pens colour some of the dots. The colour doesn’t bleed if one positions the point of the pen in the centre of the dot. If some bleeding happens, it can be removed using a blender pen. Attach the ribbon to the front of the card.

Cut out one of the small mouse roundels and mount on gold mirri card. Mount a sentiment on gold mirri card and attach both to the front of the card.

Using the Punch Bunch Oak Leaf punch, punch out two leaves and attach them to the card, with a Miss Godiva flower.

Attach the other roundel to the back of the card.

This card will fit in a C5 envelope.

Top 50